H10 9145 9140 LED Fog Light Bulbs 10000LM Halogen Replacement Bulbs Kit
- Regular price
- $35.99 USD
- Regular price
- Sale price
- $35.99 USD
- Unit price
Sku : A500-N36US-H10
LED fog light are the best choices in poor weather when visibility is reduced, especially misty, rainy, foggy, or dusty weather. Headlights are not a good choice since they are too bright in this kind of weather, they reflect into the driver's eyes, so use the right fog lights,keep safe.
Our 6500K white SMD LED chips H10 fog light,super brightness and penetrating power ensures that you have a great clarity and vision when driving in fog or rain, allowing you see further and clearer for safer driving.
BRIGHTEN YOUR WAY
With real brightness of 10000 lumens per set, NOVSIGHT LED fog light can bring you 2 times brighter than halogen bulb.
ENHANCE YOUR VISIBILITY
360-degree lighting, creates a perfect beam pattern, the penetration capacity of the beam is stronger, brings you a broader perspective. There are no dark spots or shadowed areas, ensuring your driving safety in bad weather.
ACCOMPANY YOU LONGER
With design of the unique hollow, advanced aluminum body, intelligent IC driver and exceptional heat dissipation that ensure a longer lifespan up to 50,000+ hours.
OVERCOME BAD WEATHER
NOVSIGHT H10 LED fog light bulbs adopt IP68 waterproof design, allowing them still function properly under the various extreme weather, such as rain, snow, fog, etc.
SAVE YOUR TIME
NOVSIGHT H10 LED fog lights are almost 1:1 design as halogen bulbs, fits for 98% vehicles, just plug and play, you can easily install without any modifications and tools within 5 minutes.
Note：used as fog light only, not for headlight low beam or high beam.
Wattage: 40W/Pack (20W/bulb)
Lumens: 10000 Lumens
W/O Fan: Without fan
Fit for: Front Fog Light
- Orders Handling Time within 48 hours (excluding weekends).
|US/CA/UK Area||Shipping Method||Conditions||Shipping Time||Costs|
|USA||USPS-Standard Shipping||＜1.2 KG||3-8 Business Day||Free|
|USA||USPS-Standard Shipping||1.2-2 KG||3-8 Business Day||$6.00|
|USA||USPS-Standard Shipping||2.1-2.6 KG||3-8 Business Day||$8.00|
|USA||USPS-Standard Shipping||＞2.6 KG||3-8 Business Day||$10.00|
|UK||Royal Mail Tracked 48||＜1.2 KG||3-8 Business Day||Free|
|UK||Royal Mail Tracked 48||1.2-2 KG||3-8 Business Day||$6.00|
|UK||Royal Mail Tracked 48||2.1-2.6 KG||3-8 Business Day||$8.00|
|UK||Royal Mail Tracked 48||＞2.6 KG||3-8 Business Day||$10.00|
|CA||Standard Shipping||＜1.2 KG||3-8 Business Day||Free|
|CA||Standard Shipping||1.2-2 KG||3-8 Business Day||$6.00|
|CA||Standard Shipping||2.1-2.6 KG||3-8 Business Day||$8.00|
|CA||Standard Shipping||＞2.6 KG||3-8 Business Day||$10.00|
DUE TO COVID19: International shipping options, tracking & delivery may be impacted
We’ve improved our international shipping methods to get you faster delivery and better tracking. If you have any questions,you can send mails to us.
*DUTIES & TAXES*
It is rare, but occasionally some customers may receive an invoice for duties or tariffs from their home country's customs agency.
The lights do not work properly
1.Check if the power connectors are properly
connected, and make sure that the vehicle headlight
switch is on the "ON" position.
2.Make sure that the vehicle's battery is fully
charged to supply power to the LED bulb.
3.Install the LED bulbs with the resistors (CANbus).
4.The resistor (CANbus) is polarity sensitive. If the
LED bulbs do not function properly after installation,
please reverse the resistor (CANbus) male
connector 180 degrees and try again.
One of the bulbs is not working
1.Make sure the connection is good. If one of the
bulbs still doesn't work, swap the left and right side
bulbs and test again.
2.Some series of car lights are polarity sensitive.If
the LED bulbs do not work properly after installation,
please reverse the connector 180 degrees and try
The lights flicker or flash
Install the LED bulb with the resistors (CANbus) toresolve the issue..
A warning lamp appears on the vehicle's system dashboard.
This is a harmless side-effect of the low-wattage
LED bulbs not being recognized by the vehicle's
system and can be resolved with the installation of
an additional set of resistors (CANbus).
The light pattern is wrong after the car lights are installed
1. Check whether the lamp body is installed and
turned up and down. As H4, H13 and 9004/9007
models are installed separately from the top and the
2. Check whether the lamp body is rotated in the
correct direction and locked in place after inserting
the locking ring.
There is not enough space for installation on the passenger side
For some vehicles, such as Honda CRV 2007-2014,
the headlight assembly on the passenger side is
very close to the fuse box, so there is not enough
space to operate the bulb installation. So we need
unclip and adjust fuse box for easier access duringthe installation process..
Dust cover can not be installed back
For some vehicles, the light housing dust cover can
not be installed back after installing the LED lights.
In this case, you can consult our brand customer
service to request a modified dust cover for free.
The light bulbs isdifficult to rotate in place.
For some vehicles, the light housing dust cover is
thick, which makes it difficult for LED bulbs to rotate
in place in the light housing. To solve this problem,
you need to forcefully push the LED bulbs into the
light housing and then rotate it clockwise.