2011-2015 Chevrolet Cruze use a set of H13 headlight bulb for Low Beam and high beam. For H13 Dual beam bulbs ,they have two filaments and allows to create two beams (high and low) when both are activated.
LED bulb are Much brighter than factory bulbs, just Without flickering! as most of our cucustomerssotmer derscribe.
If you are looking for a pair of H13 with higher power, you can try to our N52 series led bulbs here.
Up to 12,000 Lumens, 6500K Cool White
Customized beam patterns, Brighter and Safer experience to car owner
Easy-to-Install, almost 1:1 VS chevy cruze halogen bulbs
For this chevy cruze H13 led ,the Installation just take 10 minutes without tools. Sometimes the drivers side are easier than the new LED on the passenger side.
When install the light, please remember to get the 3 and 9 clock with the fan up position. Follow the installation steps ,you will upgreade your chevy cruze light very easily.
For 2016-2019 models, most of them use H11+9005. For example, 2016 Chevrolet Cruze LS w/o Projector-Type Headlamps，use H11 as low beam and 9005 as high beam, front fog light use H11.For these models ,buy 9005 and H11 here.
NOVSIGHT H13 LED Kit
All-in-One Conversion Kit
Please Note ：
- The filter system may not be 100% accurate,the bulb size may vary between trim of your vehicle.Please double check owners manual or original bulb size to confirm before placing an order.
- If the LED bulb and fan do not work after installation, please try 180°reverse the plug and reconnect.
What's in the package :
Chevy cruze headlight bulbs H13 LED x2 , plus Product Manual
- Model: H13(9008,P26.4t)
- Power: 60W/Set(30W/Bulb)
- Voltage: DC9-32V
- Color Temperature: 6500K Cool White
- Lumen: Up to 12,000 lms/Set
- Waterproof Rate: IP 68
- Operating Temperature: -45℃ - +80℃
- Connect Type: Plug and Play
- Orders Handling Time within 48 hours (excluding weekends).
|US/CA/UK Area||Shipping Method||Conditions||Shipping Time||Costs|
|USA||USPS-Standard Shipping||＜2.0 KG||7-8 Business Day||Free|
|USA||USPS-Standard Shipping||2.1-2.6 KG||7-8 Business Day||$5.00|
|USA||USPS-Standard Shipping||2.61-2.9 KG||7-8 Business Day||$8.00|
|USA||USPS-Standard Shipping||2.9-6 KG||7-8 Business Day||$9.99|
|UK||Royal Mail Tracked 48||＜2 KG||7-8 Business Day||Free|
|UK||Royal Mail Tracked 48||2.1-2.6 KG||7-8 Business Day||$5.00|
|UK||Royal Mail Tracked 48||2.61-2.9 KG||7-8 Business Day||$8.00|
|UK||Royal Mail Tracked 48||2.91-6 KG||7-8 Business Day||$9.99|
|CA||Standard Shipping||＜2 KG||7-8 Business Day||Free|
|CA||Standard Shipping||2.1-2.6||7-8 Business Day||$6.00|
|CA||Standard Shipping||2.61-2.9 KG||7-8 Business Day||$8.00|
|CA||Standard Shipping||＞2.91-6 KG||7-8 Business Day||$9.99|
DUE TO COVID19: International shipping options, tracking & delivery may be impacted
We’ve improved our international shipping methods to get you faster delivery and better tracking. If you have any questions,you can send mails to us.
*DUTIES & TAXES*
It is rare, but occasionally some customers may receive an invoice for duties or tariffs from their home country's customs agency.
The lights do not work properly
1.Check if the power connectors are properly
connected, and make sure that the vehicle headlight
switch is on the "ON" position.
2.Make sure that the vehicle's battery is fully
charged to supply power to the LED bulb.
3.Install the LED bulbs with the resistors (CANbus).
4.The resistor (CANbus) is polarity sensitive. If the
LED bulbs do not function properly after installation,
please reverse the resistor (CANbus) male
connector 180 degrees and try again.
One of the bulbs is not working
1.Make sure the connection is good. If one of the
bulbs still doesn't work, swap the left and right side
bulbs and test again.
2.Some series of car lights are polarity sensitive.If
the LED bulbs do not work properly after installation,
please reverse the connector 180 degrees and try
The lights flicker or flash
Install the LED bulb with the resistors (CANbus) toresolve the issue..
A warning lamp appears on the vehicle's system dashboard.
This is a harmless side-effect of the low-wattage
LED bulbs not being recognized by the vehicle's
system and can be resolved with the installation of
an additional set of resistors (CANbus).
The light pattern is wrong after the car lights are installed
1. Check whether the lamp body is installed and
turned up and down. As H4, H13 and 9004/9007
models are installed separately from the top and the
2. Check whether the lamp body is rotated in the
correct direction and locked in place after inserting
the locking ring.
There is not enough space for installation on the passenger side
For some vehicles, such as Honda CRV 2007-2014,
the headlight assembly on the passenger side is
very close to the fuse box, so there is not enough
space to operate the bulb installation. So we need
unclip and adjust fuse box for easier access duringthe installation process..
Dust cover can not be installed back
For some vehicles, the light housing dust cover can
not be installed back after installing the LED lights.
In this case, you can consult our brand customer
service to request a modified dust cover for free.
The light bulbs isdifficult to rotate in place.
For some vehicles, the light housing dust cover is
thick, which makes it difficult for LED bulbs to rotate
in place in the light housing. To solve this problem,
you need to forcefully push the LED bulbs into the
light housing and then rotate it clockwise.
- Choosing a selection results in a full page refresh.