9004 HB1 LED Bulbs 90W 20000 lumens High Low Beam Headlamp Conversion Kits Quick-Install
- Regular price
- $84.99 USD
- Regular price
- Sale price
- $84.99 USD
- Unit price
Sku : A500-N56US-9004
This high and low beam integrated dual beam 9004 led bulb has 2 rows of LEDs per headlight bulb. It can be activated separately for high beam or low beam settings. The compact lamp body design makes it easy to place in the lamp housing, so you no longer have to worry about installation. You will be attracted by this super bright and long life led bulb, quickly replace your dim and broken halogen light with Novsight 9004 led light.
600% brighter than halogen: The dual-beam 9004 LED headlamp emit 20,000 lumens of 6500K cool white illumination per set (10,000 lumens each), makes it 6 times brighter than halogen. Powerful light output allows LED lights to reach 1,200 feet, greatly improving nighttime visibility.
Lifespan up to 100,000+ hours: The fan plays a key role in the life of the whole bulbs. The built-in silent drone-level fan provides ultra-high speed up to 12,000 per minute, so that the heat generated by the bulb is quickly taken away, ensuring the bulb life up to 100,000 hours.
Automotive-specific chipsets for headlamp: The advanced chipsets integrated with high and low beams is specially designed for automobiles. The intelligent chip system monitors the operation of the bulbs in real time and removes the high temperature in time. Compared to other bulbs on the market Novsight 9004 LED chipsets have greater durability.
10 Minutes Easy Installation: We use an all-in-one design to make the light as compact as possible to fit inside the light housing without power cords and drivers. You only need to take out the previous halogen bulb, and then insert the HB1 LED bulbs according to the steps, 5mins plug and play.
9004 LED Headlight Conversion Kit/Headlamp Specification
Light Source Type: LED
Item Weight: 9.9 ounces
Color Temperature: 6500 Kelvin
Package Dimensions : 4.8 x 4.13 x 2.44 inches
Warranty: 2 Year Warranty
1.Some sensitive cars may flicker after installed(not quality issue) need a additional canbus decoder.
2.Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.
3.When installing the locking ring section to the vehicle's light housing, be very careful not to drop the locking ring inside the housing
- Orders Handling Time within 48 hours (excluding weekends).
|US/CA/UK Area||Shipping Method||Conditions||Shipping Time||Costs|
|USA||USPS-Standard Shipping||＜1.2 KG||3-8 Business Day||Free|
|USA||USPS-Standard Shipping||1.2-2 KG||3-8 Business Day||$6.00|
|USA||USPS-Standard Shipping||2.1-2.6 KG||3-8 Business Day||$8.00|
|USA||USPS-Standard Shipping||＞2.6 KG||3-8 Business Day||$10.00|
|UK||Royal Mail Tracked 48||＜1.2 KG||3-8 Business Day||Free|
|UK||Royal Mail Tracked 48||1.2-2 KG||3-8 Business Day||$6.00|
|UK||Royal Mail Tracked 48||2.1-2.6 KG||3-8 Business Day||$8.00|
|UK||Royal Mail Tracked 48||＞2.6 KG||3-8 Business Day||$10.00|
|CA||Standard Shipping||＜1.2 KG||3-8 Business Day||Free|
|CA||Standard Shipping||1.2-2 KG||3-8 Business Day||$6.00|
|CA||Standard Shipping||2.1-2.6 KG||3-8 Business Day||$8.00|
|CA||Standard Shipping||＞2.6 KG||3-8 Business Day||$10.00|
DUE TO COVID19: International shipping options, tracking & delivery may be impacted
We’ve improved our international shipping methods to get you faster delivery and better tracking. If you have any questions,you can send mails to us.
*DUTIES & TAXES*
It is rare, but occasionally some customers may receive an invoice for duties or tariffs from their home country's customs agency.
The lights do not work properly
1.Check if the power connectors are properly
connected, and make sure that the vehicle headlight
switch is on the "ON" position.
2.Make sure that the vehicle's battery is fully
charged to supply power to the LED bulb.
3.Install the LED bulbs with the resistors (CANbus).
4.The resistor (CANbus) is polarity sensitive. If the
LED bulbs do not function properly after installation,
please reverse the resistor (CANbus) male
connector 180 degrees and try again.
One of the bulbs is not working
1.Make sure the connection is good. If one of the
bulbs still doesn't work, swap the left and right side
bulbs and test again.
2.Some series of car lights are polarity sensitive.If
the LED bulbs do not work properly after installation,
please reverse the connector 180 degrees and try
The lights flicker or flash
Install the LED bulb with the resistors (CANbus) toresolve the issue..
A warning lamp appears on the vehicle's system dashboard.
This is a harmless side-effect of the low-wattage
LED bulbs not being recognized by the vehicle's
system and can be resolved with the installation of
an additional set of resistors (CANbus).
The light pattern is wrong after the car lights are installed
1. Check whether the lamp body is installed and
turned up and down. As H4, H13 and 9004/9007
models are installed separately from the top and the
2. Check whether the lamp body is rotated in the
correct direction and locked in place after inserting
the locking ring.
There is not enough space for installation on the passenger side
For some vehicles, such as Honda CRV 2007-2014,
the headlight assembly on the passenger side is
very close to the fuse box, so there is not enough
space to operate the bulb installation. So we need
unclip and adjust fuse box for easier access duringthe installation process..
Dust cover can not be installed back
For some vehicles, the light housing dust cover can
not be installed back after installing the LED lights.
In this case, you can consult our brand customer
service to request a modified dust cover for free.
The light bulbs isdifficult to rotate in place.
For some vehicles, the light housing dust cover is
thick, which makes it difficult for LED bulbs to rotate
in place in the light housing. To solve this problem,
you need to forcefully push the LED bulbs into the
light housing and then rotate it clockwise.