2003-2011 Honda Element LED Light Bulb H4 Hi/Lo Dual Beam Headlight Upgrade,6500K
- Regular price
- $54.59 USD
- Regular price
- Sale price
- $54.59 USD
- Unit price
Sku : A500-N30US-H4-3
We provide better cost-effective LED lights for 2003-2011 Honda Element to enhance the look of your Honda Element and give him a better lighting ambience. To get more information about LED bulb, click this auto bulb finder.
Honda Element LED Headlight Bulbs Key Features
Efficient cooling system | High-grade Aluminum Bulbs Body
Headlight H4 bulb features a high-speed turbo fan that quickly removes heat from the bulb. The whole body of high-grade aluminum can speed up heat dissipation and prolong the service life of up to 50,000 hours.
LED Headlight Bulb| Powerful Lighting Output
With a light output of 55W 13,000 lumens, the 9003 LED headlight bulb instantly fills the entire headlight with bright light, leaving your road free from darkness and showing a brighter road ahead.
More Focused Beam | Further and Safer
This H4 LED lamp bead adopts ZES chip, which produces a perfect light pattern. The light is concentrated on the driver's side and will not cause dizziness to the opposite driver.
1:1 Design as Halogen | Plug and Play
The car light 9003 adopts a 1:1 halogen lamp design, without additional driving and connection ports, which saves a lot of installation trouble, just like halogen lamps, plug and play.
Adaptable to Honda Element | No flickering and errors
The built-in intelligent IC driver and CANBUS make the H4/9003 LED combination set more compatible. Works with Honda Element systems without flicker and code errors. Don't worry, we offer a two-year hassle-free guarantee.
Important Information: This H4/9003 LED headlight bulb replacement kit is not fit for 2007 2008 Honda Element SC.
Recommended LED Lights for Other Bulb Parts | Purchased separately
For 2003-2011 Honda Element and 2007 2008 Honda Element EX/LX: The brake light, tail light and rear turn signal light are 7440.
For 2009-2011 Honda Element: The daytime running lights are 9005.
Want to know how to clean your headlight,click the blog below: How to Clean Your Headlights Better? Tell you the methods!
Novsight LED Bulbs Warm Tips
1.This H4/9003 LED headlight bulb set includes 2pcs H4 LED headlight bulbs for 2003-2011 Honda Element high beam and low beam.
2.Our LED headlight bulbs replaces halogen bulbs only. It does not replace HID or LED from factory.
3.The filter system may not be 100% accurate,the bulb size may vary between trim of your vehicle.Please double check owners manual or original bulb size to confirm before placing an order.
- Orders Handling Time within 48 hours (excluding weekends).
|US/CA/UK Area||Shipping Method||Conditions||Shipping Time||Costs|
|USA||USPS-Standard Shipping||＜1.2 KG||3-8 Business Day||Free|
|USA||USPS-Standard Shipping||1.2-2 KG||3-8 Business Day||$6.00|
|USA||USPS-Standard Shipping||2.1-2.6 KG||3-8 Business Day||$8.00|
|USA||USPS-Standard Shipping||＞2.6 KG||3-8 Business Day||$10.00|
|UK||Royal Mail Tracked 48||＜1.2 KG||3-8 Business Day||Free|
|UK||Royal Mail Tracked 48||1.2-2 KG||3-8 Business Day||$6.00|
|UK||Royal Mail Tracked 48||2.1-2.6 KG||3-8 Business Day||$8.00|
|UK||Royal Mail Tracked 48||＞2.6 KG||3-8 Business Day||$10.00|
|CA||Standard Shipping||＜1.2 KG||3-8 Business Day||Free|
|CA||Standard Shipping||1.2-2 KG||3-8 Business Day||$6.00|
|CA||Standard Shipping||2.1-2.6 KG||3-8 Business Day||$8.00|
|CA||Standard Shipping||＞2.6 KG||3-8 Business Day||$10.00|
DUE TO COVID19: International shipping options, tracking & delivery may be impacted
We’ve improved our international shipping methods to get you faster delivery and better tracking. If you have any questions,you can send mails to us.
*DUTIES & TAXES*
It is rare, but occasionally some customers may receive an invoice for duties or tariffs from their home country's customs agency.
The lights do not work properly
1.Check if the power connectors are properly
connected, and make sure that the vehicle headlight
switch is on the "ON" position.
2.Make sure that the vehicle's battery is fully
charged to supply power to the LED bulb.
3.Install the LED bulbs with the resistors (CANbus).
4.The resistor (CANbus) is polarity sensitive. If the
LED bulbs do not function properly after installation,
please reverse the resistor (CANbus) male
connector 180 degrees and try again.
One of the bulbs is not working
1.Make sure the connection is good. If one of the
bulbs still doesn't work, swap the left and right side
bulbs and test again.
2.Some series of car lights are polarity sensitive.If
the LED bulbs do not work properly after installation,
please reverse the connector 180 degrees and try
The lights flicker or flash
Install the LED bulb with the resistors (CANbus) toresolve the issue..
A warning lamp appears on the vehicle's system dashboard.
This is a harmless side-effect of the low-wattage
LED bulbs not being recognized by the vehicle's
system and can be resolved with the installation of
an additional set of resistors (CANbus).
The light pattern is wrong after the car lights are installed
1. Check whether the lamp body is installed and
turned up and down. As H4, H13 and 9004/9007
models are installed separately from the top and the
2. Check whether the lamp body is rotated in the
correct direction and locked in place after inserting
the locking ring.
There is not enough space for installation on the passenger side
For some vehicles, such as Honda CRV 2007-2014,
the headlight assembly on the passenger side is
very close to the fuse box, so there is not enough
space to operate the bulb installation. So we need
unclip and adjust fuse box for easier access duringthe installation process..
Dust cover can not be installed back
For some vehicles, the light housing dust cover can
not be installed back after installing the LED lights.
In this case, you can consult our brand customer
service to request a modified dust cover for free.
The light bulbs isdifficult to rotate in place.
For some vehicles, the light housing dust cover is
thick, which makes it difficult for LED bulbs to rotate
in place in the light housing. To solve this problem,
you need to forcefully push the LED bulbs into the
light housing and then rotate it clockwise.