Consider the lumens, beam pattern, led chips, plug size, body size, Installation, and all in one conversion kit, you will never miss Novsight LED.
Hyundai Kona H7 LED Headlight Bulbs Benefits:
1:1 Design as Halogen| Upgrading Halogen light bulbs to LED
1:1 same design as halogen without external driver and connector makes mini LED H7 suitable for your Hyundai Kona headlight housing. Non-polarity socket, connected just like halogen bulbs without any tools, no worry about external driver too big to install or connector break.
300% Brighter Than Original Headlights
Ditch your dim yellow halogens and make way for this H7 6500K bright white LED bulbs. This H7 LED headlight conversion kit with 13000lm 55W high power gives you the best horizons on the road, 3 times brighter than original headlights.
Perfect Beam Pattern
Novsight H7 LED headlight bulbs have an optimized beam pattern that will not block oncoming traffic due to large lumens. The beam of light is far, wide, clear, clean, and brilliantly white, improving the driving experience.
High-speed Turbo Fan Design
Built-in 13,000RPM/MIN high-speed turbo fan, greatly extending the working time of H7 LED lights. Over 50,000 hours of LED light kit life reduces the frequency of changing car headlights and keep your Hyundai Kona running at optimum brightness at all times.
Canbus Ready For 99% Vehicles
The built-in intelligent IC driver and canbus make the H7 lamp suitable for 99% of vehicles on the market, without radio interference and light flickering problems. Some sensitive models may require additional decoders.
H7 LED bulb models may vary by trim package, manufacturer and market modifications. So some car models may require additional base adapters to fix LED bulbs, click here to buy.
To get more LED H7 bulb with different wattage or plug, click here.
Recommended LED Lights for Other Bulb Parts | purchased separately
For 2018 2019 2020 Hyundai Kona: The back up lights and rear turn signal lights are 1156.
To make your trip more atmospheric, check out our LED strip lights.
Novsight LED Bulbs Warm Tips
- This H7 LED headlight bulb set includes 4 pcs H7 LED headlight bulbs for 2018 2019 2020 Hyundai Kona high beam and low beam.
- Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.
- The filter system may not be 100% accurate,the bulb size may vary between trim of your vehicle.Please double check owners manual or original bulb size to confirm before placing an order.
Novsight LED Bulbs Kit Tech Spec
- Model: H7
- Power: 55W/Set(27.5W/Bulb)
- Voltage: DC9-32V
- Color Temperature: 6500K Cool White
- Lumen: Up to 13,000 lms/Set
- Waterproof Rate: IP68
- Operating Temperature: -45℃ - +80℃
- Connect Type: Plug and Play
- Orders Handling Time within 48 hours (excluding weekends).
|US/CA/UK Area||Shipping Method||Conditions||Shipping Time||Costs|
|USA||USPS-Standard Shipping||＜2.0 KG||7-8 Business Day||Free|
|USA||USPS-Standard Shipping||2.1-2.6 KG||7-8 Business Day||$5.00|
|USA||USPS-Standard Shipping||2.61-2.9 KG||7-8 Business Day||$8.00|
|USA||USPS-Standard Shipping||2.9-6 KG||7-8 Business Day||$9.99|
|UK||Royal Mail Tracked 48||＜2 KG||7-8 Business Day||Free|
|UK||Royal Mail Tracked 48||2.1-2.6 KG||7-8 Business Day||$5.00|
|UK||Royal Mail Tracked 48||2.61-2.9 KG||7-8 Business Day||$8.00|
|UK||Royal Mail Tracked 48||2.91-6 KG||7-8 Business Day||$9.99|
|CA||Standard Shipping||＜2 KG||7-8 Business Day||Free|
|CA||Standard Shipping||2.1-2.6||7-8 Business Day||$6.00|
|CA||Standard Shipping||2.61-2.9 KG||7-8 Business Day||$8.00|
|CA||Standard Shipping||＞2.91-6 KG||7-8 Business Day||$9.99|
DUE TO COVID19: International shipping options, tracking & delivery may be impacted
We’ve improved our international shipping methods to get you faster delivery and better tracking. If you have any questions,you can send mails to us.
*DUTIES & TAXES*
It is rare, but occasionally some customers may receive an invoice for duties or tariffs from their home country's customs agency.
The lights do not work properly
1.Check if the power connectors are properly
connected, and make sure that the vehicle headlight
switch is on the "ON" position.
2.Make sure that the vehicle's battery is fully
charged to supply power to the LED bulb.
3.Install the LED bulbs with the resistors (CANbus).
4.The resistor (CANbus) is polarity sensitive. If the
LED bulbs do not function properly after installation,
please reverse the resistor (CANbus) male
connector 180 degrees and try again.
One of the bulbs is not working
1.Make sure the connection is good. If one of the
bulbs still doesn't work, swap the left and right side
bulbs and test again.
2.Some series of car lights are polarity sensitive.If
the LED bulbs do not work properly after installation,
please reverse the connector 180 degrees and try
The lights flicker or flash
Install the LED bulb with the resistors (CANbus) toresolve the issue..
A warning lamp appears on the vehicle's system dashboard.
This is a harmless side-effect of the low-wattage
LED bulbs not being recognized by the vehicle's
system and can be resolved with the installation of
an additional set of resistors (CANbus).
The light pattern is wrong after the car lights are installed
1. Check whether the lamp body is installed and
turned up and down. As H4, H13 and 9004/9007
models are installed separately from the top and the
2. Check whether the lamp body is rotated in the
correct direction and locked in place after inserting
the locking ring.
There is not enough space for installation on the passenger side
For some vehicles, such as Honda CRV 2007-2014,
the headlight assembly on the passenger side is
very close to the fuse box, so there is not enough
space to operate the bulb installation. So we need
unclip and adjust fuse box for easier access duringthe installation process..
Dust cover can not be installed back
For some vehicles, the light housing dust cover can
not be installed back after installing the LED lights.
In this case, you can consult our brand customer
service to request a modified dust cover for free.
The light bulbs isdifficult to rotate in place.
For some vehicles, the light housing dust cover is
thick, which makes it difficult for LED bulbs to rotate
in place in the light housing. To solve this problem,
you need to forcefully push the LED bulbs into the
light housing and then rotate it clockwise.
- Choosing a selection results in a full page refresh.