Please ditch your dim halogen lights to make way for our LED kit for your Mazda MX-5 Miata. It will provide ultra-high lumen output and improve your visibility while driving at night.
2006-2015 Mazda MX-5 Miata LED Replacement Halogen Bulb Guide:
Custom Made For Mazda MX-5 Miata LED Low Beam H7 | N52 Series 50W 10,000LM 6500K| 2PCS With 2 years warranty
Novsight N52 series uses CSP chips, 20000 lumens 100W per pair, which produces a perfect beam without glare or black spots. The light is concentrated on the side where you are driving, without dazzling oncoming traffic. H7 dipped beam bulb increases your visibility by 600% and greatly improves your driving comfort at night.
Custom Made For Mazda MX-5 Miata LED High Beam H11 | N52 Series 50W 10,000LM 6500K| 2 PCS with 2 Years Warranty
Our H11 LED conversion kits are made of 6063 aviation aluminum material with built-in 12000RPM turbo fan, the heat dissipation efficiency is twice that of ordinary LED lights. The precision design and smart IC driver makes it suitable for your car, no radio interference and flash, true plug and play.
Recommended LED Lights for Other Bulb Parts | purchased separately
Front Fog Light | H11
Replace with our brighter LED fog lights H11 and increase the speed at which you can be seen by other drivers. To shop H11 in different wattage or different plug types right now!
Brake Light | 7440
When you press the brake pedal, a red light will light up at the rear of your car to warn the cars behind to slow down. For Mazda MX-5 Miata, you can use LED 7440 bulb for your brake light.
Back Up Light | 194
The back up light is installed at the rear of the car to illuminate the road behind the car, warn the vehicles and pedestrians behind the car, and indicate that the car is reversing. The back up lights are all white.
Want to know more? click this vehicle bulb finder
Novsight LED Bulbs Warm Tips
- This set only replaces the 2006-2015 Mazda MX-5 Miata whose original headlights are halogen lamps
- If the LED bulb and fan do not work after installation, please try 180°reverse the plug and reconnect.
- For cars using H7 as stock headlight bulbs, the position of the clips on the stock H7 will be slightly different due to the model or year of manufacture, which makes the LED light unable to be installed. Extra LED bulb adapter may be required.
- Orders Handling Time within 48 hours (excluding weekends).
|US/CA/UK Area||Shipping Method||Conditions||Shipping Time||Costs|
|USA||USPS-Standard Shipping||＜2.0 KG||7-8 Business Day||Free|
|USA||USPS-Standard Shipping||2.1-2.6 KG||7-8 Business Day||$5.00|
|USA||USPS-Standard Shipping||2.61-2.9 KG||7-8 Business Day||$8.00|
|USA||USPS-Standard Shipping||2.9-6 KG||7-8 Business Day||$9.99|
|UK||Royal Mail Tracked 48||＜2 KG||7-8 Business Day||Free|
|UK||Royal Mail Tracked 48||2.1-2.6 KG||7-8 Business Day||$5.00|
|UK||Royal Mail Tracked 48||2.61-2.9 KG||7-8 Business Day||$8.00|
|UK||Royal Mail Tracked 48||2.91-6 KG||7-8 Business Day||$9.99|
|CA||Standard Shipping||＜2 KG||7-8 Business Day||Free|
|CA||Standard Shipping||2.1-2.6||7-8 Business Day||$6.00|
|CA||Standard Shipping||2.61-2.9 KG||7-8 Business Day||$8.00|
|CA||Standard Shipping||＞2.91-6 KG||7-8 Business Day||$9.99|
DUE TO COVID19: International shipping options, tracking & delivery may be impacted
We’ve improved our international shipping methods to get you faster delivery and better tracking. If you have any questions,you can send mails to us.
*DUTIES & TAXES*
It is rare, but occasionally some customers may receive an invoice for duties or tariffs from their home country's customs agency.
The lights do not work properly
1.Check if the power connectors are properly
connected, and make sure that the vehicle headlight
switch is on the "ON" position.
2.Make sure that the vehicle's battery is fully
charged to supply power to the LED bulb.
3.Install the LED bulbs with the resistors (CANbus).
4.The resistor (CANbus) is polarity sensitive. If the
LED bulbs do not function properly after installation,
please reverse the resistor (CANbus) male
connector 180 degrees and try again.
One of the bulbs is not working
1.Make sure the connection is good. If one of the
bulbs still doesn't work, swap the left and right side
bulbs and test again.
2.Some series of car lights are polarity sensitive.If
the LED bulbs do not work properly after installation,
please reverse the connector 180 degrees and try
The lights flicker or flash
Install the LED bulb with the resistors (CANbus) toresolve the issue..
A warning lamp appears on the vehicle's system dashboard.
This is a harmless side-effect of the low-wattage
LED bulbs not being recognized by the vehicle's
system and can be resolved with the installation of
an additional set of resistors (CANbus).
The light pattern is wrong after the car lights are installed
1. Check whether the lamp body is installed and
turned up and down. As H4, H13 and 9004/9007
models are installed separately from the top and the
2. Check whether the lamp body is rotated in the
correct direction and locked in place after inserting
the locking ring.
There is not enough space for installation on the passenger side
For some vehicles, such as Honda CRV 2007-2014,
the headlight assembly on the passenger side is
very close to the fuse box, so there is not enough
space to operate the bulb installation. So we need
unclip and adjust fuse box for easier access duringthe installation process..
Dust cover can not be installed back
For some vehicles, the light housing dust cover can
not be installed back after installing the LED lights.
In this case, you can consult our brand customer
service to request a modified dust cover for free.
The light bulbs isdifficult to rotate in place.
For some vehicles, the light housing dust cover is
thick, which makes it difficult for LED bulbs to rotate
in place in the light housing. To solve this problem,
you need to forcefully push the LED bulbs into the
light housing and then rotate it clockwise.
- Choosing a selection results in a full page refresh.