H11/H8/H9 LED Headlight: Best LED Bulbs for your Vehicle

jeep with led bulbs outdoor

Socket / Size Compatibility:

Novsight H11/H8/H9 LED headlight can be used to replace both high beam and low beam,for some vehicles, they used fog lamps H11. They are versatile and compatible with 9005 (high beam), 9006 (low beam) sockets and fog lamps.

Differences:

On some vehicles models, the difference when compared to 9005 and 9006s, lies in between wattage and luminosity. H11 are single beam 50W which is less than 65W of 9005 High beam halogen bulbs. They are also a tad dimmer than high beam 9005s. When compared to 9006 Low beam halogen bulbs, both consume same power at 50W, but H11 are brighter.

The difference between H11, H8 and H9 is as follow: H9 are 65W and H8 are on the lower side at 35W. H8 are also less brighter than H11 or H9. Whereas H9(65W) are brighter than H11(50W). We suggest shop the headlight bulbs according to the same size of your original halogen lights. To ensure that the bulbs can fit perfectly your light housing.

In conclusion, without any significant loss in brightness. H11 LED life span is also longer than any other halogen bulb.

Supported Vehicles:

Confused about the type of bulb your car supports? Just go to our Official Website  and on center left you will see “By Vehicles”. This will seamlessly tell you which bulb your car supports from the catalogue. If still confused, scroll slightly and you will see drop down selector for make, year and model. And all sorted out.

How to Install H11 Bulbs:

Plug-and-play nature of Novsight Headlights makes the installation a breeze. They are installed just under 10 minutes, and you are ready to go. Here is an easy 8 -step installation guide:

  1. Remove the headlight cover/dust cover.
  2. Locate the stock bulbs and twist it counter clock wise to unscrew.
  3. Detach the wires of the bulb from vehicle’s connectors.
  4. Remove original light bulb and keep in your glove compartment for backup bulbs.
  5. Attach the bulb wires to vehicles connectors. *
  6. Place Novsight H11/H9/H8 LED Headlight into the slot and turn clock wise to secure.
  7. Place the wiring into the headlight housing.
  8. Place the dust cover back to its original place and secure.
  9. All Done!

After installing the bulbs, we suggest adjusting your headlight firstly, to check that they are properly installed and the lights and beams are appropriate. To know more about how to make a proper headlight adjustment, please read here.

*If the bulbs do not light up and/or fans don’t run, detach the wires from the connector, rotate 180° and attach again. This should do the work (since poles are inverted now).

Tips

For some car owners who need to make some headlight restoration, you can read our blog to know how to do yourself, you won't have to spend much money at the mechanic.

How To Restore Old Car Headlights for Free

 

Best H11/H8/H9 LED Bulbs in the Market:

Why go from standard halogen to LED bulbs? And specifically why Novsight? To get started LED bulbs are 600% Brighter than Halogen headlight bulbs. Novsight H11 LED bulbs are equipped with CSP advanced chip, which emits 100W 6500K 20000ML high brightness output. Furthermore, Novsight bulbs don’t have any blue tones, brightness fade or black spots most LED headlights fall prey to. They perform better in snow, rain and fog than OEM headlights. In addition to all of this, Novsight H11/H8/H9 LED Headlight Bulbs with 12,000RPM Speed Super fan, offer rapid thermal diffusion. And 50,000 hours/10-year extended life span ensures that these bulbs last long enough.

All of this makes Novsight H1/H8/H9 LED Headlights (Sku: A500-N52-H11) the best in market.

Leave a comment