9005 9006 LED Bulbs Kit
Built-in CSP LED chips with 60W 12000lumens per pair 6500K cool white. 300% brighter than halogen light. Give you the best horizons while driving but not blinding others.
Double vision enhancement
Provide the most safety beam pattern,long distance and wide range. Make sure you can foresee the danger on the road while driving in extreme weather like rainy, snowy, foggy day.
Solid aviation aluminum body,12,000RPM turbo fan provide efficient heat dissipation and super cooling ability. Ensure 50000+ hours lifespan with the best performance,2 YEARS WARRANTY
9005 9006 LED Headlights need to know
Novsight car lights can solve 95% of the vehicle's radio interference problem, and only a very small number of vehicles need to install a decoder to solve it. You can buy with confidence, even if you eventually encounter such a problem, we will do our best to help you solve it.
Does anti flicker / decoder kit can solve the possible flicker problem?
Novsight led bulbs fit with 95% vehicle, but for vehicle like Dodge, Jeep, Bmw，Volvo etc, extra canbus are needed to avoid flickering or dashboard error, If you encounter such a problem, we can provide canbus for free.
Does this need any modification?
For most vehicles, Novsight LED bulbs could offer a plug and play installation.
For factory H1, H3 and HID bulbs, some modifications will be needed, but it's easy to make it work.
CAN Bus means Controller Area Network Bus. This system monitors your vehicle and reports operating conditions. CAN Bus systems are commonly found in European vehicles such as BMW, Audi, Mercedes, Volkswagen, Porsche, and in many American vehicles. While most late model American vehicles have CAN Bus systems, it is always good to check with your vehicle dealer to see which system your vehicle has before purchasing electrical products.
Halogen bulbs and HID bulbs are usually inserted into the back of the headlight housing from inside the engine compartment. Many bulbs are a twist-lock design. You twist the bulb connector counterclockwise to unlock the bulb from its housing, then pull out the connector and change the bulb. Some bulbs are held in the back of the headlight housing by metal clips, which must be carefully removed to change the bulb. On some vehicles, access to the back of the headlight housing may be restricted or blocked by other components that are in the way, which mean you may have to remove some covers, trim or the headlight housing itself to change the bulb When installing a new bulb, DO NOT touch the glass with our bare fingers because the oils on your skin can contaminate the glass and cause it to crack when the bulb gets hot. Handle the bulb by the plastic base only.You can also follow our facebook page/youtube channel and watch the video,if you cannot find out send mails to us firstname.lastname@example.org