880 Bulb Installation Tutorial
Table of Contents
- Are 880 and 881 the Same Bulbs?
- Common Vehicle Models Using the 880 Bulb
- 880 Bulb Installation Tutorial
- Points to Pay Attention To
- Conclusion-880 Bulb Installation Tutorial Video
The 880 bulb is primarily found in fog lights, cornering lights, and sometimes as daytime running lights (DRLs) in a variety of vehicles, including many American cars from the late 20th and early 21st centuries, like the Ford Mustang, Chevrolet Corvette, Dodge Ram, Jeep Wrangler, and others. While it's not a universal bulb across all makes, you can find it in many models from manufacturers like Dodge, Ford, Chevrolet, Jeep, and GMC.
Are 880 and 881 the Same Bulbs?
Common Vehicle Models Using the 880 Bulb
Daytime Running Lights (DRLs): Some vehicles use the 880 bulb for their DRL system, especially in older models.
Cornering Lights: You might also find the 880 bulb used in cornering light applications. Examples of Vehicle Makes and Models
American Brands:
- Cadillac: 2002-2005 Escalade
- Chevrolet: Corvette (1997-2002), S-10 (1995-2004), and other models where it serves as a DRL or fog light bulb
- Dodge: Ram (1999-2001), and other models
- Ford: Mustang (1994-2004), and other models
- Jeep: Wrangler TJ (1997-2006), Cherokee XJ (1984-2001)
- GMC: Various models that use the 880 socket
How do I find the right LED bulb for my vehicle?
There are two methods to help you find the right light bulb:
1) Click here to go to our vehicle bulb finder, enter the year, model, etc. of your vehicle to get the right bulbs for your vehicle.
2) Please contact us at service@novsight.com and tell us the year and model of your vehicle, as well as the type of headlight you are interested in, our professional customer service team will get back to you as soon as possible.
880 Bulb Installation Tutorial
Tools Needed:
Gloves or a clean cloth (to handle bulbs safely)Flathead screwdriver (to remove any screws if needed)
New 880 LED bulbs Installation Steps:
Step 1:Prepare the Vehicle:
Open the hood and locate the back of the headlight assembly.
Step 2:Access the Headlight or Fog Light Housing:
Depending on your vehicle model, you may need a flathead screwdriver to help remove the cover or trim pieces.
Step 3:Remove the Old Halogen Bulb:
Carefully disconnect the power connector from the back of the halogen bulb by pressing the tab and gently pulling it away.
Step 4:Install the New 880 LED bulbs:
Insert the new LED bulb into the socket, ensuring it is aligned correctly. Twist the bulb clockwise to lock it securely into the headlight or fog light housing.
Step 5:Reconnect the Components:
Ensure all components are securely fastened and the bulbs are properly seated.
Step 6:Test the New LED Bulbs:
Test both low and high beam functions if applicable to ensure proper operation.
Points to Pay Attention To
Handling: Always wear gloves or use a clean cloth to avoid contaminating the bulbs with oils from your hands. This helps extend the lifespan of the bulbs.Polarity Sensitivity: Many 880 LED bulbs are polarity sensitive, meaning they will only work if installed with the correct polarity. If the bulbs do not light up, disconnect the wiring harness, flip the connector, and try again.
Proper Fitment: Ensure the bulb is seated securely in the socket, as a loose bulb can lead to poor performance and possible damage.
Conclusion
Watch Install Video Guide Online:
How to install LED Fog bulbs - 880
880 bulbs Install Way as this H11 bulb install video way. They also have two pins, and H11 is also used as a fog light bulb in some models. But 880 halogen bulbs look like smaller than H11 halogen. The 880 halogen bulb is a straight whole, and there is no 90-degree corner near the connection port. However, you can refer to this H11 installation video as well.
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.